Search covers the manual, features and updates. Press Escape to close.

All features

Elmiko EEG

Elmiko ExG-32 amplifiers over USB, with EEG channel mapping and impedance checks.

Introduced
12 Nov 2026 update
Last update
12 Nov 2026 update
Updates
1
Elmiko EEG selected in the BrainAssistant hardware chooser.

Choose Elmiko EEG in the hardware chooser to connect an Elmiko ExG-32 amplifier over USB on 64-bit Windows. The Elmiko driver must already be installed. The amplifier is marked “in development” in the device list.

The ExG-32 configuration maps 22 EEG inputs, including Oz. The ten ExG bipolar inputs can be assigned to electrode pairs; auxiliary inputs such as pulse oximetry are excluded from EEG channel selection.

The signal check supports impedance measurement when the device reports it as available, including both electrodes of the ExG bipolar pairs. Impedance values refresh continuously while the check is open. The amplifier measures up to about 100 kΩ; higher readings and unconnected electrodes show as “-”. EEG processing pauses during the impedance check and resumes when it ends.

Changelog

1 update

12 Nov 2026 update

Connect Elmiko ExG-32 amplifiers New

  • Connect an Elmiko ExG-32 amplifier over USB and use its 22-channel EEG configuration, including Oz.
  • Assign the ten ExG bipolar inputs to electrode pairs and check both electrodes’ impedance on supported devices.

More in Devices & signal

All in this area →

DSI headsets

Wearable Sensing DSI headsets with the Donning Wizard and expanded controls.

Sienna Ultimate

Sienna Ultimate amplifiers, including the 19-channel setup and the impedance signal check.

Signal check

The pre-session signal and impedance check: raw EEG and impedance per electrode, with impedance presets.