Search covers the manual, features and updates. Press Escape to close.

All features

Neurobit Optima

Neurobit Optima and Optima+ amplifiers over USB, Bluetooth LE or Bluetooth, with the connected device detected on start.

Last update
12 Nov 2026 update
Updates
1

Choose Neurobit with Change EEG Software / Device Connection in the connection popup (top right) to connect a Neurobit Optima or Optima+ amplifier with two or four channels. BrainAssistant ships the Neurobit driver and sets up the USB driver when it is missing.

When BrainAssistant starts, it looks for a Neurobit that is switched on and answers: over USB first, then Bluetooth LE, then Bluetooth, and selects its model. A device that is only paired with the computer does not count. If no device answers, the model chosen last in the connection popup is used.

The connection popup also offers:

  • the device model, to choose a different Optima model by hand,
  • Use internally linked reference: all active channels share one reference linked inside the amplifier; unchecked, each channel measures bipolar,
  • Open custom Settings Window, the Neurobit driver’s own device settings,
  • Start EEG Recording, to start or stop the data stream.

The signal check measures the electrode impedance. Update Neurobit Firmware in Settings → Advanced → Setup downloads the current Optima firmware and opens the Neurobit firmware loader with it.

Changelog

1 update

12 Nov 2026 update

The reference setting of the quick settings stays as you set it Fixed

  • A channel configuration that sets the Neurobit reference mode (internally linked or hardware bipolar) applies it while it is selected, without changing the reference setting in the Neurobit quick settings. Configurations without a reference mode use that setting.
  • Switching to another amplifier no longer restarts the Neurobit while it is closed, and recording is not switched off for the next Neurobit connection.

Channel configurations

Neurobit that cannot be opened no longer crashes the signal check Fixed

  • When the Neurobit driver cannot open the selected device (another model selected, device not found, driver missing), BrainAssistant keeps waiting for the connection and shows its connection hints instead of closing when you switch the signal check to impedance mode.

Connected Neurobit detected on start, driver 5.4.9 Improved

  • When BrainAssistant starts, it selects the Neurobit Optima that is switched on and connected: over USB first, then Bluetooth LE, then Bluetooth. A device that is only paired is ignored, and without an answering device the model chosen last is used.
  • The updated Neurobit driver 5.4.9 recovers more cleanly from a lost connection, shows clipped signals at their limit instead of as jumps to the opposite extreme, and fixes the device settings window on 64-bit Windows.

More in Devices & signal

All in this area →

Movella DOT sensors

Movement sensors for biofeedback: connection, calibration and battery levels.

Muse

Muse headbands over Bluetooth, with presets.